How do you attach a wire fence to a wooden post?

Cecilia Jobson   |   Member since 2011  |  10+ Answers Submitted  |  ✔ Verified

Hold the wire in place on the fence and apply the first staples to the post. Wear heavy gloves for the job to protect your hands from the wire. Unroll a couple of feet of wire, pulling it taut, and then staple to the fence rails. Keep unrolling and stapling, allowing about 24 inches between staples.

Community Badges:

Nathan Morgan   |   Member since 2018  |  10+ Answers Submitted  |  ✔ Verified

Similarly, how do you attach a wire fence to a split rail?

Cut a long length of heavy-gauge wire, wrap it around the wire fence and a wooden rail or post and twist the wire's ends to secure the materials together. Placing a piece of fabric between the wire and wood prevents the wire from cutting the wood.

Also, how do you attach hardware cloth to a fence? How to Attach Hardware Cloth to a Metal Fence

  1. Dig a trench 6 inches deep along the outside edge of the fence. Pile the dirt removed beside of the trench and discard the turf excavated from the trench.
  2. Unroll the hardware cloth next to the trench.
  3. Stand the hardware cloth up in the trench.
  4. Cut the hardware cloth with the wire cutters as needed to adjust the length.

Nathan Cadman   |   Member since 2013  |  10+ Answers Submitted  |  ✔ Verified

Also asked, can chicken wire keep dogs out?

Buried chicken wire will deter even the most obsessive digger. Digging may be a natural doggy behavior, but it's also a dangerous one. However, a roll of chicken wire and little elbow grease will stop your digging pooch in his tracks. Dig a 12-inch deep, 6-inch wide trench along the bottom of the fence.

Candace Tutton   |   Member since 2013  |  10+ Answers Submitted  |  ✔ Verified

How do you secure wire mesh to wood?

Hold the wire mesh in place, or have a friend hold it for you, and then press an industrial staple gun -- with staples slightly smaller than the depth of your frame -- onto the top corner of the mesh. Pull the trigger and insert a staple into the top left corner, and then the top right corner.

  Please Login to Submit Your Answer

User Login

Related Answered Questions

Below is a list of answers to questions that have a similarity, or relationship to, the answers on "How do you attach a wire fence to a wooden post?". This list is displayed so that you can easily and quickly access the available answers, without having to search first.

Ethan Upton   |   Member since 2012  |  ✔ Verified

How do you attach mesh to a fence?

Attach the mesh to T-posts with wire ties or baling wire. Attach the mesh at the top of the post, in the middle of the post, and at the bottom of the post. Fencing can be attached to wooden posts with wire or with a heavy-duty staple gun. A gate will work best if attached to a post set in concrete.

Alexander Lane   |   Member since 2016  |  ✔ Verified

How do you install a 4x4 fence post?

Method 1 Setting the Post in Soil or GravelTry this method if you have dense soil. Choose a durable fence post. Prep the wood against moisture (optional). Dig the hole. Drop gravel into the hole. Position the post in the hole. Fill the hole with tamped crushed stone or soil. Finish with a small hillock.

Marigold Khan   |   Member since 2010  |  ✔ Verified

How deep should a T post be?

Typically, in part to ensure that posts lodge below the frost line, experts call for a hole deep enough to submerge the bottom third of the post below ground. For a six-foot-tall post, therefore, you would dig a hole two feet deep. The ideal diameter, meanwhile, should measure three times the width of the post.

Angelica Ranks   |   Member since 2007  |  ✔ Verified

How do you fix chicken wire timber?

To add stability to a chicken wire panel stapled to a wooden post, nail a length of one-by-two lumber over the line of staples from the top of the chicken wire panel to where the post enters the ground. Fasten it to the post with galvinized nails or wood screws of the appropriate size.

Bristol Ashley   |   Member since 2008  |  ✔ Verified

How do you attach a fence to a metal post?

use string and stakes to layout the desired location for your fence and dig holes for metal posts. Concrete can be used to set the posts into the ground. Use cedar, redwood or preservative-treated lumber and finish with exterior grade stain or paint. Dimensions can be modified to fit your specific needs.

Lexi Zaoui   |   Member since 2012  |  ✔ Verified

How do you make a T post welded wire fence?

Be sure that you mark out a section for the gate.Step 2 - Planting Your Posts. Use a post hole digger to dig at least 2 feet down. Step 3 - Rails. Measure and cut 1x4 boards for the top and bottom rails. Step 4 - Welded Wire Fencing. Start at a corner post and unroll several feet of welded wire. Step 5 - The Gate.

Bristol Yates   |   Member since 2008  |  ✔ Verified

How do you make a dog wire out of chicken wire?

Unroll the rest of the chicken wire around the outside of the posts and "T" bars. Nail the chicken wire to each post as you go. Attach the chicken wire to the "T" bars using wire fencing ties and pliers. Use three ties per "T" bar at the bottom, middle, and top of the bar.

  Please Login to Submit Your Answer

User Login

free ebook pdf

Free PDF Ebook

200 Hardest Brain Teasers Mind-Boggling Puzzles, Problems, and Curious Questions to Sharpen Your Brain

Download Now

Page Statistic

Overall Page Sentiment
Compound: 0.9582
1.4 minutes Average Session
3 Co-Authors Check
11 QnA Included
Jan 29, 2022 Last Updated
300+ Total Viewed

Ask a Question

How is your experience?

30+ people rate this page as helpful

Disclaimer for Accuracy of Information: "This website assumes no responsibility or liability for any errors or omissions in the content of this site.
The information contained in this site is provided by our members and on an "as is" basis with no guarantees of completeness, accuracy, usefulness or timeliness."

Jan 29, 2022
QnA by Community - Overall Statistic 2022
Total Questions1.5M+
Total Answers3.9M+
Number of Topics750+